7 signs indicates a chainsaw chain need replacement?
01 Dec 2023
0 Comments
Chainsaw are useful machines, which helped us work more effectively. However, if the chainsaw isn’t properly maintained, it can be very dangerous to the operator. The manufactures manual is very helpful to guild us in checking signs. Normally, the maintenance job mainly towards the chainsaw chain. As the chain will lose its sharpness over time, which makes our work harder and more dangerous. So what signs indicates a new one is required? Here we list several signs which you should also be aware of.
-
You need to apply more pressure to complete basic task than before.
The chain should pull into the wood while doing the work. Your chainsaw is trying to tell you that a new chain is needed to finish the work effectively.
-
The chain start make finer sawdust rather than rough one.
-
Frequent Dulling.
If you found your chain becomes dull more quickly than before, this usually due to wear and tear on the teeth. In this case, a new chain is needed.
-
You have difficulty in positioning.
If you found it hard to hold it still in place, the dull chain may cause safety risks. when a chainsaw chain is worn out, it may end up cutting too deep into one side with a shaking performance.Then you should sharpening it or replace it with new one.
-
The chainsaw start smoke.
If you see smoke when cutting, it means your chain is blunt or there is something wrong with the lubricating system. You should check if you need to lubricate the chain or the oiling hole is blocked.
-
Missing Teeth.
Another way to check if your chain need a replacement is to know if there is missing or uneven teeth. In most cases, this situation happens after the chain hit a rock or embedded nail, and sometimes you may haven’t notice it.
-
Be care of Rust.
Normally, you will have rust on your chains if you have not properly oiling and cleaning your chainsaw.
In conclusion, a worn-out chain will cause safety problem and reduce performance, so it’s important to check it regularly. This way, you can keep your chainsaw working smoothly, and more importantly, keep you safe for the years to come.
